A full polishing range.
From cutting and one-step correction to final finishing.
Tools & Microfiber
Choose and organise towels, applicators, wash equipment and inspection tools.
Guides in this topic
124 guides
Gloss Measurement: Keep the Instrument Footprint Inside the Test Area
A gloss reading can include surrounding material if the measurement footprint crosses the test boundary. The visible opening is not always the full relevant area.
Gloss Measurements on Brushed Surfaces: Record the Direction
Directional texture can make appearance measurements dependent on instrument orientation. A comparison should state how the measurement direction relates to the surface pattern.
Gloss Meter Calibration Tiles: Protect the Reference Surface
A dirty or scratched reference tile can affect subsequent instrument checks. Reference care should follow the instrument supplier's method.
Colour Checks After Coating: Separate Lighting from Surface Change
A perceived colour difference can depend on the light source and viewing conditions. Repeat the observation before assigning it to the coating.
Coating Roughness Measurements: Preserve the Filter and Evaluation Length
Roughness results depend on how the measured profile is processed and evaluated. Method settings belong with the number.
Coating Roughness on Directional Finishes: Measure the Specified Traverse
A profile measured along a directional texture can differ from one measured across it. The traverse direction must match the specification.
Coating Workshop Sensors: Place Them Where the Work Happens
A sensor near a doorway or ceiling may not describe the application zone. Placement should answer the actual process question.
Coating Inspection Instruments: Keep a Record of Firmware Changes
Instrument or analysis-software updates can affect settings, outputs or workflows. Preserve enough information to interpret results across a change.
Liquid Coating FTIR: Record the Cell and Path Length
A liquid FTIR spectrum depends on the sampling arrangement, including the cell and optical path. These details belong in a reproducible analytical method.
Coated-Car Rinse Checks: Take the Sample at the Outlet
A treatment-system reading and water delivered at the hose outlet can answer different questions. Downstream equipment may affect the delivered water.
Ceramic Coating Drying: Inspect Compressed-Air Equipment Before Use
Air used for drying should be appropriate for the surface and equipment instructions. A compressor system can introduce its own contamination concerns.
Coating Colour Reports: SCI and SCE Are Different Measurement Modes
SCI includes the specular component in colour measurement; SCE excludes it. The modes can respond differently to surface appearance.