Skip to product information
NANOLAB®SPRAY PROTECTION
NANOLABAQUAPHOBWater-based hydrophobic spray coating
CHEMISTRY YOU CAN TRUST.473 ml / 16 fl oz
SPRAY PROTECTION

AQUAPHOB. Water-based hydrophobic spray coating

Make protection part of your wash.

A water-based, hydrophobic spray coating for a simple spray-and-buff routine. Apply to a clean wet or dry surface, during drying or afterwards.

Designed for

Clean wet or dry surfaces, following product instructions

473 ml / 16 fl ozApplication guidance below

473 mlBottle size
WET / DRYApplication options
SPRAYThen buff
01 / THE DIFFERENCE

Developed for the surface.
Designed for the process.

01

Fits your routine.

Use on a washed surface while drying the vehicle or after it is dry.

02

Straightforward application.

Spray and buff with a clean microfiber towel.

03

Refresh when needed.

Reapply as needed to maintain the desired surface behaviour.

02 / KNOW YOUR FORMULA

The details
make the difference.

Choose the right product for your surface. Follow the current application and care guidance.

Product
AQUAPHOB
Category
Water-based hydrophobic spray coating
Size
473 ml / 16 fl oz
Compatible surfaces
Clean wet or dry surfaces, following product instructions
Application level2/10

1 = Easiest · 10 = More technique

Easy to apply with basic preparation and the correct product instructions.

Lower scores mean easier application. Higher scores reflect more technique and familiarity with the process. With experience, even a 10/10 product can feel straightforward.

03 / APPLICATION & CARE

A considered process.
A lasting impression.

Read the full instructions before you begin.

How To Apply

Pre-Application Preparation: Ensure a washed surface.

Tools Required: In addition to the coating material, prepare a microfiber towel.

Application Method (Wet/Dry Surface):

Spray an adequate amount of the coating material onto the surface/microfiber towel, apply more material as needed.

Buffing Phase: buff the surface, ensuring no high spots remain.

Storage

NANOLAB AQUAPHOB. has a shelf life of at least 12 months when stored between 0°C / 32°F and 25°C / 77°F in the tightly closed original container.
After opening – must be used within 180 days.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Maintenance

If needed, re-apply.

Material Safety Data Sheet

Request the current safety data sheet from NANOLAB product support before use.

YOUR NEXT GREAT FINISH STARTS HERE

Make it AQUAPHOB.

Connect with a distributor for availability and product support.