GLOSS. Ceramic coating for glossy PPF & vinyl

Pre-Application Preparation: Ensure a pristine surface by removing any traces of oil, grease, fat, fingerprints, etc., using our recommended PREP solution.

Tools Required: In addition to the coating material, prepare an applicator pad and two microfiber towels. Opt for towels of different colors if possible for better organization.

Application Method:

1. Apply an adequate amount of the coating material onto the applicator pad, ensuring it’s sufficiently primed for even distribution. If the applicator feels “stuck”, apply more material as needed.
2. Commence by outlining the area for application, starting from the surface edges. Then, create a central X shape to facilitate uniform coverage.
3. Employ crisscross motions to spread the material along the X and Y axes, ensuring thorough coverage.

Buffing Phase: To promote strong adhesion, refrain from wiping the coating immediately post-application. Allow it to haze over or display the rainbow effect before proceeding. Use the first towel to swiftly remove excess material in straight lines; speed is key at this stage, with no need for perfection. Subsequently, utilize the second towel to buff the surface in circular motions, ensuring no high spots remain.

Curing Times:
Tack-Free: 2 hours
Initial Curing: 24 hours
First Wash: 14 days
Full Curing: 30 days

NANOLAB GLOSS. has a shelf life of at least 12 months when stored between 0°C / 32°F and 25°C / 77°F in the tightly closed original container.
After opening – must be used within 180 days.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.

GLOSS offers a one-year warranty, ensuring lasting protection for your surfaces.

To maintain the validity of the warranty, it’s crucial to follow these maintenance steps every 6 months by a NANOLAB Certified Installer:

1. Wash: Begin by thoroughly washing the coated surface using a pH-neutral car shampoo and a microfiber wash mitt. Rinse off any dirt and debris.
2. Drying: After washing, dry the surface using a clean microfiber drying towel or a forced-air blower. Avoid air-drying to prevent water spots.
3. Inspection: Carefully inspect the coating for any signs of damage, such as areas where the coating may have worn off. Address any issues promptly.
4. Ceramic Coating Re-Application: Apply another GLOSS ceramic coating layer to enhance the hydrophobic properties of the coating and boost its longevity. Follow product’s instructions for application.

Throughout the one-year period, it’s essential to avoid using abrasive cleaners or harsh chemicals that could degrade the ceramic coating. Regular maintenance and timely repairs will help maximize the durability and performance of the coating over time.

Download NANOLAB GLOSS. MSDS