A full polishing range.
From cutting and one-step correction to final finishing.
Liquid Coating FTIR: Record the Cell and Path Length
A liquid FTIR spectrum depends on the sampling arrangement, including the cell and optical path. These details belong in a reproducible analytical method.
Updated · NANOLAB Knowledge
Practical approach
Ask the laboratory to record the cell materials, path length and specimen preparation used for the comparison.
Different cell arrangements can produce spectra that should not be compared as though only the coating formulation changed.
Decision limits
Do not infer a concentration difference from raw signal size without the appropriate method and calibration.
Related guidance
- Choosing Microfiber Towels for Ceramic Coating
- What to Do with Towels Used for Ceramic Coating
- Coating Roughness Measurements: Preserve the Filter and Evaluation Length
- Coated-Car Rinse Checks: Take the Sample at the Outlet
Method reference: Thermo Fisher: FTIR sample handling. References describe their stated methods or products; they do not certify NANOLAB products or establish compatibility with an unlisted surface.
Ask NANOLAB about the exact product and intended use. Use the current product documentation for formulation-specific instructions.
Continue reading
Choosing Microfiber Towels for Ceramic Coating
Choose towels by their role in the coating process, cleanliness and finish suitability rather than assuming the thickest towel is always best.
What to Do with Towels Used for Ceramic Coating
Separate used coating towels promptly and decide on cleaning, reassignment or disposal using the product's residue and safety guidance.
Coating Roughness Measurements: Preserve the Filter and Evaluation Length
Roughness results depend on how the measured profile is processed and evaluated. Method settings belong with the number.