A full polishing range.
From cutting and one-step correction to final finishing.
Ceramic Coating Basics
Understand nano ceramic coatings, water behaviour, hardness claims, wax and PPF before selecting protection.
Guides in this topic
71 guides
Ceramic Coating Thickness Claims: Ask Which Instrument Measured What
A coating-thickness claim is meaningful only when the method can measure the layer being discussed.
A Pencil Hardness Claim Does Not Predict Every Real-World Scratch
A pencil-hardness result describes performance in a defined test, not immunity to every scratch encountered by a vehicle, boat or household surface.
Gloss Improvement from Coating: Use the Same Prepared Surface as the Reference
A coating's contribution to gloss should be compared with the same prepared surface before application.
Contact Angle on a Curved Car Panel: Understand the Measurement Limits
Contact-angle measurement on a curved car panel requires more care than estimating an angle from a bead photograph.
Ceramic Coating Test Panels Stored Face Down: Protect the Reference Surface
A test panel stored face down can acquire contamination or contact marks before the next coating observation.
Why a Fresh Topper Can Confuse a Long-Term Coating Trial
A fresh topper can change the water behaviour of a surface during a long-term coating trial.
Coating Samples with Different Cure Ages: Delay the Comparison or Label the Difference
Coating samples with different cure ages may not be ready for the same comparison.
A Ceramic Coating Test with One Excellent Panel and One Poor Panel
One excellent coating test panel and one poor panel signal a need to investigate variation before calculating a simple average.
Coating Durability Reports: Describe the Endpoint before Comparing Months
Durability reports are difficult to compare when they count months to different endpoints.
A Coating Trial That Changes Cleaner Halfway Through
Changing cleaner halfway through a coating trial changes the maintenance history.
How to Write a Useful Negative Result from a Ceramic Coating Test
A negative coating-test result is useful when it describes a reproducible observation and the conditions that produced it.
Coating Claims with Percentages: Ask for the Denominator
A percentage in a coating claim needs a defined denominator and measurement.