A full polishing range.
From cutting and one-step correction to final finishing.
HOME
Surface-specific coating knowledge for living spaces: compatibility, preparation, cleaning and maintenance.
Guides in this topic
119 guidesArchitectural Coating Projects: Track Runoff Across More Than One Material
A cleaning or coating process can contact adjacent materials through runoff even when the applicator stays on the intended panel. Map that route before work so compatibility decisions cover the actual exposure area.
Building Surface Registers: Record the Cleaning Product That Actually Reaches Each Finish
A building's surface register is more useful when it records actual cleaner contact, including overspray and runoff. The product assigned to a surface on paper may not be the only product that reaches it during routine maintenance.
Surface-Coating Mock-Ups: Keep the Approved Sample Available Through the Project
An approved mock-up is most useful when it remains identifiable and available during the full project. A photograph or a remembered description may not preserve every appearance detail needed for later comparison.
Nano-Coating Projects: Separate a Cosmetic Pilot from a Building-Wide Rollout
A successful cosmetic pilot supports a specific surface and process under the conditions tested. Before expanding across a building, check which additional materials, access conditions and maintenance practices were absent from that pilot.
Architectural Glass Surface Numbers: Identify the Face Before Requesting a Coating
Glass surface numbers identify faces within a glazing construction. Use the supplier's drawing to identify the proposed treatment face instead of describing it only as inside or outside.
Pyrolytic and Sputter-Coated Glass: Factory Coatings Have Different Histories
Pyrolytic and sputter-coating describe different glass-manufacturing processes. Neither term should be treated as a generic approval for adding a site-applied nano coating.
Heat-Soaked Glass and Nano Coating: Different Functions and Evidence
Heat soaking is a process associated with toughened glass and fracture-risk management. It is not a surface-protection coating or evidence that an aftermarket coating is compatible with the pane.
Acid-Etched Glass Cleaning: A Local Spot Treatment Can Leave a Visible Boundary
Follow the acid-etched glass manufacturer's cleaning method rather than assuming local spot cleaning is always appropriate. Some product guidance calls for cleaning the entire surface to avoid visible halos.
Glass Coating Projects and Room Renaming: Preserve the Asset History
A room number can change during a building project. Keep the glass asset's identity linked to both the old and new location references so treatment and care records remain usable.
Nano Coatings at Home: Start with the Surface
A home contains glass, metal, stone, ceramics, plastics and factory-finished materials.
A Room-by-Room Surface Survey Before Nano Coating
A simple survey can prevent unsuitable products being applied during a home coating project.
How to Evaluate a Home Coating Test Spot
A discreet test spot should answer a specific question: does the complete preparation and coating process suit this finish and its intended use?