A full polishing range.
From cutting and one-step correction to final finishing.
Glass Coating Projects and Room Renaming: Preserve the Asset History
A room number can change during a building project. Keep the glass asset's identity linked to both the old and new location references so treatment and care records remain usable.
Updated · NANOLAB Knowledge
The key distinction
A simple mapping prevents maintenance staff from losing the product history when offices, hotel rooms or project zones are renumbered. The asset record should identify the pane or enclosure independently of a temporary construction label.
Practical checks
- Assign a stable asset identifier.
- Record location-name changes without overwriting the history.
- Check the mapping during the final maintenance handover.
Example
Illustrative example: an enclosure is coated under a construction room number, then handed over under a different hotel numbering scheme. Without a mapping, the maintenance team may retrieve instructions for the wrong surface.
Scope and limits
This is a documentation practice, not evidence that every pane received the same product. Preserve actual treatment records and distinguish untreated or replaced assets in the final register.
Related guidance
- Nano Coating on Glass with Safety Markings: Preserve Required Identification
- A Room-by-Room Surface Survey Before Nano Coating
- Patterns in Toughened Glass: Check for Anisotropy Before Blaming a Coating
- Removable Upholstery Covers: Check the Assembly Before Taking Them Off
Discuss the intended surface with NANOLAB. Use the current product documentation for formulation-specific instructions.