A full polishing range.
From cutting and one-step correction to final finishing.
AUTO, MARINE & HOME Coating Guides
Practical guides for vehicle care, boats, living spaces, shower glass, stainless steel and private-label coating projects.
Explore 3219 guides, covering surface preparation, product selection, application and everyday maintenance.
All guides
3219 guides
Weathering Reference Samples: Benchmark the Test as Well as the Product
A retained reference material can help a team interpret a new weathering run when it is used within an appropriate test plan. Its identity, storage and expected behaviour need documentation just as the candidate coating does.
Weathering Inspections That Interrupt Exposure: Record the Time Outside the Chamber
Removing coating specimens for inspection changes their exposure history. Record when they leave and return, and follow the method's requirements for handling and evaluation so that inspection time is not silently counted as active exposure.
Coating Weathering Reports: Separate Surface Cleaning from Evaluation
Cleaning a weathered specimen before measurement can change what the evaluation reveals. Define whether the assessment concerns the exposed surface as received, the surface after an approved cleaning step, or both.
Distinctness of Image and Gloss: Why a Bright Reflection Can Still Look Blurred
A surface can reflect strongly while producing an indistinct image. Gloss and distinctness of image describe different aspects of appearance, so a gloss reading alone may not capture the finish quality a customer is describing.
Orange-Peel Inspection Distance: Keep the Viewing Position Consistent
The apparent texture of a painted surface can change with viewing distance. When comparing a finish before and after polishing or coating, keep the viewing position and lighting consistent so the comparison does not exaggerate an improvement.
Metallic Paint Colour Travel: A Single Viewing Angle May Miss the Difference
Metallic and effect finishes can look different as the viewing angle changes. A comparison based on one angle may miss a visible mismatch that matters to the owner or to a coating trial.
Coating Colour Measurements on Small Parts: Match the Aperture to the Target
A colour measurement must sample the intended area. If the instrument aperture includes an edge, neighbouring material or an uncovered region, the result may not represent the coated part being compared.
Reference White and Black in Colour Measurement: Preserve the Calibration Routine
A colour instrument's reference routine belongs to the measurement method. Follow the manufacturer's instructions for the correct references, their condition and the required sequence before comparing coating samples.
Transparent Coating Colour Tests: Specify the Background Behind the Sample
The background used behind a transparent or translucent specimen can influence an appearance comparison. Specify it before testing and keep it consistent so that a change in backing is not mistaken for a change in the coating.
Directional Coating Application Marks: Rotate the Sample During Inspection
Some marks become visible only when the viewing direction changes relative to the application path. Inspect a suspected directional pattern from more than one orientation before deciding that the finish is uniform or diagnosing its cause.
Coating Sample Orientation in Storage: Label the Face Before It Becomes Ambiguous
A clear or lightly coated sample can become difficult to orient after storage. Identify the treated face and relevant direction before testing so later measurements do not accidentally examine the wrong side or an unrelated region.
Coating Trial Photographs: Keep Image Processing Consistent
Editing settings can change the apparent contrast, colour and clarity of a coating comparison. Preserve the original photographs and apply a consistent, disclosed processing approach when images are used as evidence.