A full polishing range.
From cutting and one-step correction to final finishing.
Understand film coverage, preparation, installation checks, edge care and compatible NANOLAB coatings for PPF.

A matte-finish evaluation needs a nearby reference under consistent light. Memory of the original appearance is an unreliable comparison.

A maintenance spray approved for painted surfaces is not automatically approved for the film and coating combination.

A repaired film edge needs the film installer's release before subsequent coating work. The surrounding surface may be ready while the repair area is not.

Removing a coating from PPF can affect the film's own surface treatment. A method suitable for paint may be unsuitable for film.

A coating application does not automatically repair scratches in the film. Existing defects should be evaluated under the film manufacturer's guidance.

A booster should not conceal unresolved dirt or edge damage. Inspect the film after appropriate cleaning and before adding another layer.

Film and coating support may come from different providers. Keeping both sets of instructions helps future service decisions.

A partial paint protection film installation creates a cleaning boundary across the bonnet, wings or another panel.

An offcut from the actual PPF installation provides a useful surface for evaluating coating compatibility and appearance.

Printed sponsor graphics can create several care zones on a wrapped car.

A factory warranty on paint protection film does not automatically approve every aftermarket coating.

A dark line at a PPF edge may be dirt on the surface, contamination under a lifted edge or a visual effect from the installation itself.