A full polishing range.
From cutting and one-step correction to final finishing.
Stainless Steel
Nano coating for stainless steel: finish identification, fingerprints, cleaning, preparation and ongoing care.
Guides in this topic
149 guidesNano Coating and Stainless Steel Passivation: Different Decisions
A protective surface coating should not be treated as a substitute for resolving the stainless steel's underlying condition. Passivation and aftermarket coating are different processes.
Metal Coating Mock-Ups: Include the Final Fabrication Sequence
Cutting, forming and finishing after a sample is approved can create a different surface from the one originally evaluated.
Metal Nano Coating: Evaluate Recessed Corners for Excess Residue
Recessed corners can collect material and be difficult to inspect. A flat sample may miss this application issue.
Stainless Steel Coating Near Welds: Resolve Fabrication Condition First
Weld areas may need specialist finishing or remediation before a cosmetic coating is considered. The coating should not conceal unresolved fabrication issues.
Nano Coating on Stainless Mesh: Assess Access to the Whole Geometry
Mesh presents intersections, openings and hidden contact areas unlike a flat panel. A coating method needs to suit the actual geometry.
Coated Metal Packaging: Test the Contact Face of Protective Foam
Protective packaging contacts the finished surface and can affect its appearance during storage or transport. The contact material needs evaluation.
Nano Coating on Stainless Steel Fasteners: Define Functional Exclusions
Fasteners can have functional interfaces beyond their visible appearance. A cosmetic treatment should not extend into those interfaces without approval.
Stainless Steel Fingerprint Trials: Standardize the Handling Comparison
Fingerprint visibility depends on handling and viewing conditions. A fair comparison needs a consistent procedure and clear endpoint.
Nano Coating on Stainless Steel Bends: Inspect the Formed Part
A flat material sample does not represent every feature of a formed component. Bends change access and reflection during application and inspection.
Coated Metal Inspection: Keep Removable Smears Separate from Permanent Marks
A visible mark may be removable residue or a change in the finish. The distinction determines the next step.
Nano Coating on PVD-Finished Metal: Treat the PVD Layer as the Surface
A decorative PVD finish is part of the substrate presented to the coating. Approval for bare stainless steel does not automatically cover it.
Metal Coating Project Samples: Label the Treated Face Permanently
Clear treatments can make sample orientation difficult to identify later. The treated face should remain traceable without touching or altering it.