A full polishing range.
From cutting and one-step correction to final finishing.
Abrasion-Test Loads: Grams of Mass and Newtons of Force Are Different Units
A mass value and a force value should not share an unexplained load label. Clarify how the test apparatus defines its load before comparing abrasion or scratch reports.
Updated · NANOLAB Knowledge
The key distinction
Under standard gravity, one kilogram corresponds to approximately 9.807 newtons of weight force. The apparatus may apply force through a mechanism, so its documented method remains necessary.
Practical checks
- Record the original load unit and equipment configuration.
- Ask the laboratory how the stated load is applied.
- Convert only when the physical relationship is established.
Example
Arithmetic example: a 100-gram mass has a weight force of about 0.981 newtons under standard gravity. That does not prove that every test fixture transfers exactly that force to the specimen.
Scope and limits
Do not improvise weights or modify a tester from this calculation. Use the instrument's approved setup and preserve the complete method when comparing coating results.
Related guidance
- Coating Abrasion Tests: Track the Abrasive as a Test Variable
- Coating Test Panel Edges: Define Whether They Are Sealed
- Abrasion Mass Loss and Volume Loss: Density Changes the Comparison
- Car-Wash Product Consumption: Count Overspray Separately from Surface Coverage
Ask NANOLAB about the exact product and intended use. Use the current product documentation for formulation-specific instructions.
Continue reading
Coating Abrasion Tests: Track the Abrasive as a Test Variable
Abrasion results depend on the test arrangement, including the abrasive and its condition. An unspecified abrasive makes comparisons difficult to interpret.
Coating Test Panel Edges: Define Whether They Are Sealed
Exposed panel edges can create pathways or damage patterns that differ from the coated face. Their treatment must be specified in the test setup.
Abrasion Mass Loss and Volume Loss: Density Changes the Comparison
Equal mass loss does not necessarily mean equal volume loss when materials have different densities. A coating abrasion report should explain the chosen outcome and retain the information needed for a fair comparison.