Nano Coating Sliding Shower Doors

Sliding doors can have overlapping panels and areas that are difficult to reach. The installation and aftercare plan should account for those access limits before coating begins.

Check movement and access

Inspect rollers, tracks and panel movement through the enclosure’s normal operation. Refer mechanical problems to the installer. Identify which faces can be reached safely without removing panels or working beyond the permitted access.

Agree the treatment boundaries

Record any overlap areas or edges excluded from application. Keep coating and preparation products away from moving components unless specifically approved. Use the enclosure manufacturer’s guidance for cleaning tracks, seals and hardware; they are separate from the glass coating process.

Build an accessible routine

Choose suitable tools that can clean the approved glass areas without forcing them into gaps. Inspect the overlap from both sides after drying where practical. If cleaning requires disassembly, arrange it with a qualified installer instead of treating it as an ordinary household step. Keep the scope map so future care does not assume inaccessible areas were coated.

Read framed shower planning and the coating inspection checklist.