A full polishing range.
From cutting and one-step correction to final finishing.
Polishing Gloss Paint Beside Satin Graphics: Keep the Finish Boundary Intact
A vehicle can combine glossy paint and satin or matte graphics. Plan correction on the identified gloss surface without treating the graphic finish as another polishing area.
Updated · NANOLAB Knowledge
Identify both outer surfaces
Confirm whether the graphic is film, exposed paint or another system. Obtain the relevant care information where possible. Appearance words such as satin describe the intended look but do not identify the material or approved treatment.
Map the correction boundary
Record graphic edges, narrow painted areas and access limitations. Choose suitable protection for the process and surfaces. Avoid a pad path that relies on crossing the graphic to finish the adjacent paint.
Test the accessible gloss paint
Use a controlled finish-appropriate trial and inspect the dry result after residue removal. Keep tool and backing-plate clearance in view. A successful trial elsewhere on the car does not establish access beside the graphic edge.
Inspect both sides of the boundary
Check the agreed painted area and the adjacent graphic for residue or changed appearance. Document sections left untreated because a controlled method was unavailable. Discuss any graphic restoration separately rather than introducing gloss through an unapproved polish.
Frequently asked question
Can an ultra-fine polish be assumed safe on the satin graphic?
No. Fine abrasives can still change an intended finish. Confirm the exact surface guidance and keep the paint correction scope explicit.