A full polishing range.
From cutting and one-step correction to final finishing.
Coated Lift Panels and Protective Moving Covers: Check Contact After Removal
Temporary covers used during a building move can obscure contact marks and cleaning residues. Include their use in the care history of coated lift panels.
Updated · NANOLAB Knowledge
Review the covering method
Identify the cover material and how it is attached. Follow the lift, finish and coating guidance for permitted contact and cleaning. Do not assume that a soft-looking cover is clean or appropriate for every decorative surface.
Inspect before covering
Record the visible condition of relevant panels under consistent lighting. Note existing marks so that the removal inspection has a useful baseline. Keep the record connected to the panel locations.
Control installation and removal
Coordinate with the responsible moving or building team. Avoid improvising attachment points or adding cleaners without review. Record the period of covering and any event that could affect the surface, such as moisture or abrasive debris.
Review the exposed panels
Inspect after the covers are removed and the approved cleaning step is complete. Document marks in context before attempting additional treatment. A cover-contact pattern is evidence to investigate, rather than proof of a particular coating defect.
Frequently asked question
Should a contact mark be polished immediately?
First identify the actual outer finish and use its approved care or repair process. Polishing can alter the surface and remove evidence needed to understand the mark.