A full polishing range.
From cutting and one-step correction to final finishing.
Checking a Polisher After the Tool Has Been Dropped
A dropped polisher needs inspection before returning to paint. Cosmetic scratches on its housing are less important than changes in attachment, vibration or control.
Updated · NANOLAB Knowledge
A dropped polisher needs inspection before returning to paint. Cosmetic scratches on its housing are less important than changes in attachment, vibration or control.
Assess the starting condition
Disconnect power or remove the battery as instructed. Examine the backing plate, spindle area, housing and controls without dismantling beyond the manufacturer’s permitted checks. Inspect the pad separately for grit and impact damage.
A practical working method
- Follow the manufacturer’s inspection and service procedure.
- Replace contaminated or damaged consumables with correctly matched parts.
- Do not test an uncertain machine on customer paint.
- After any required service, verify operation through the approved checks and a suitable practice surface.
Common mistake
Continuing because the motor still runs can miss an attachment or balance problem. Increasing grip pressure to suppress new vibration does not establish that the machine is sound.
What a useful result looks like
A useful workshop record identifies the incident, inspection and release decision. If damage cannot be assessed confidently, obtain service advice. Resume the polishing process only after the tool and its consumables are fit for the intended work.