A full polishing range.
From cutting and one-step correction to final finishing.
Mobile Detailing Setup Changes: Re-Establish the Inspection Reference
A mobile job may move between light, shade and artificial illumination. Keep an inspection reference so that a changing view is not mistaken for a changing paint result.
Updated · NANOLAB Knowledge
Record the starting conditions
Identify the viewing light, panel position and inspection stage used for the initial assessment. Photograph representative observations where useful. Note access limitations that affect what can be seen before quoting correction work.
Inspect under a deliberate reference
Choose a repeatable viewing method for the test area and final check. Use appropriate inspection lighting where available. A mark disappearing in shade is not, by itself, evidence that it has been removed.
Review changes in setup
When the vehicle or lighting moves, reinspect the reference area before extending the correction process. Keep surface preparation and residue removal consistent. This helps separate a process change from a change in visibility.
Explain the acceptance view
Document the final inspection conditions and any unresolved access limitations in the job record. Agree a practical review with the customer that corresponds to the promised finish. Do not imply that one lighting condition exposes every possible mark.
Frequently asked question
Must every mobile inspection use identical weather?
Weather cannot always be repeated. Use a controlled reference where practical and state changes in conditions when interpreting the result.