Shower Glass2 min read

Inspecting Coatings on Fluted Shower Glass without Mistaking Texture for Haze

Use repeatable views and matched texture orientation when inspecting coated fluted glass so the glass pattern is not mistaken for coating haze.

Updated · NANOLAB Knowledge

Illustration of a frameless shower screen with water droplets, a squeegee and folded microfiber
Editorial illustration

Fluted glass intentionally redirects and distorts the view. A coating inspection must separate that designed texture from a new streak, residue or appearance change. A smooth-glass reference alone cannot establish acceptance.

Keep a representative untreated reference

Use the same glass pattern and orientation where possible. Record which face carries the texture and which face is treated. Observe both transmitted and reflected light under a fixed arrangement.

Do not compare one pane with vertical flutes to another rotated horizontally without noting the difference. The pattern’s relationship to the light can substantially alter what is visible.

Inspect across and along the pattern

View Question
Along the flutes Is there a continuous application or residue line?
Across the flutes Does the appearance repeat with the glass geometry?
Through the pane Is the intended visual effect preserved?

Use a test area before a full run

Apply only a product and method suitable for the actual surface. Inspect after the required processing interval and compare with the untreated reference. Agree acceptable appearance with the customer or specification owner before extending production.

Investigate pattern-linked problems

If a mark follows every groove, examine how the preparation and application tools reach that geometry. Do not assume extra product will improve coverage; it may change residue or levelling behaviour. Seek product-specific guidance for an unsuitable application method.

The accepted reference should remain available to inspectors and installers. A few controlled photographs plus a physical reference can prevent repeated arguments caused by viewing a textured product under unrelated lighting conditions.

Discuss a shower-glass coating project. For application and care, use the current instructions for the exact product.

Shower Glass1 min read

Inspecting Shower Glass Before Nano Coating

A short inspection helps determine whether shower glass needs ordinary cleaning, deposit removal or specialist restoration before coating.