A full polishing range.
From cutting and one-step correction to final finishing.
Ceramic-Coated Fleet Washing: Verify Automatic Chemical Dosing
An automatic dosing system still needs verification under its operating procedure. A dial setting alone does not establish the delivered mixture.
Updated · NANOLAB Knowledge
Practical approach
Follow the equipment supplier's check method and keep records of adjustments, product changes and maintenance.
Replacing a concentrate with another product while retaining the old setting may produce a different working solution.
Decision limits
Do not change concentration beyond the cleaner's approved range to compensate for an unresolved equipment issue.
Related guidance
- Planning Ceramic Coating Care Across a Vehicle Fleet
- Teaching a Customer to Wash a Coated Car
- Coating Chemical Resistance: Separate Immediate Marks from Recovery
- Coating Workshop Consumables: Distinguish Product Lot from Purchase Order
Ask NANOLAB about the exact product and intended use. Use the current product documentation for formulation-specific instructions.
Continue reading
Planning Ceramic Coating Care Across a Vehicle Fleet
Coordinate washing, inspection and service records across coated fleet vehicles without assuming that every vehicle has the same use or finish.
Teaching a Customer to Wash a Coated Car
Use a short practical demonstration to explain safe washing, tool separation, drying and the first-wash instructions for a coated vehicle.
Coating Chemical Resistance: Separate Immediate Marks from Recovery
Some tests call for observations at specified times after exposure. Immediate appearance and later condition should be reported separately.