A full polishing range.
From cutting and one-step correction to final finishing.
A Polishing Test Spot on Paint Previously Treated with a Glaze
A glaze can change defect visibility before correction. Establish a clean inspection baseline so the test measures paint improvement rather than temporary masking.
Updated · NANOLAB Knowledge
A glaze can change defect visibility before correction. Establish a clean inspection baseline so the test measures paint improvement rather than temporary masking.
Assess the starting condition
Ask which glaze or finishing product was applied and when. Confirm a compatible removal method for the paint and surrounding surfaces. Water behaviour or a slick feel alone cannot establish that all residue is gone.
A practical working method
- Clean a small representative area using the suitable preparation process.
- Photograph the dry defects before polishing.
- Run a conservative test, remove working residue and inspect again.
- Compare against the prepared baseline rather than the initially glazed appearance.
Common mistake
A customer may prefer the temporarily smoother-looking finish before residue removal. Explain why the baseline can look worse before it becomes a meaningful correction reference.
What a useful result looks like
A useful decision states what polish genuinely improved and which marks remain. If ceramic coating follows, complete its specific preparation requirements; a visually attractive glaze is not automatically an approved layer beneath a curing coating.