A full polishing range.
From cutting and one-step correction to final finishing.
Fingerprint Trials on Coated Metal: Define Contact and Viewing Conditions
A fingerprint demonstration can be strongly affected by how the mark is made and viewed. Define the method before using it to compare surface treatments.
Updated · NANOLAB Knowledge
Identify the surface system
Record the metal, finish, coating and any later cleaner or maintenance product. Keep the starting dry appearance documented. A trial should not describe a factory-treated surface as bare simply because no aftermarket coating was added.
Describe the contact method
State how the agreed mark is applied and keep the method comparable between areas. Record meaningful differences rather than assuming every hand contact is identical. Do not assign a precise reduction percentage without a defined assessment method.
Use a repeatable inspection
Inspect the same relevant locations under comparable light and viewing angles. Preserve contextual views and original photographs. A mark hidden by one reflection can still be visible from another position.
Separate visibility and cleaning
Record the initial mark observation and its removal by the approved routine as different outcomes. An appearance result is not proof of a hygiene or chemical-resistance function. Keep the conclusion limited to the actual trial.
Frequently asked question
Does one nearly invisible hand mark prove fingerprints have been eliminated?
No. It is one observation under defined conditions. Use a suitable repeatable method and avoid an unsupported universal claim.