A full polishing range.
From cutting and one-step correction to final finishing.
Coating Haze Reports: Identify Compensated and Uncompensated Values
Some instruments compensate haze values for influences such as background colour. A compensated result is not automatically interchangeable with an uncompensated one.
Updated · NANOLAB Knowledge
Practical approach
Record the parameter name and instrument method, and use a consistent basis for acceptance.
Comparing dark and light panels may require particular attention to how the instrument reports haze.
Decision limits
Do not remove the parameter label from a comparison chart and leave only a favourable number.
Related guidance
- Standard Deviation vs Standard Error in Coating Test Reports
- Choosing Microfiber Towels for Ceramic Coating
- Coating Viscosity Reports: Record the Spindle and Speed
- Ceramic Coating Fill Checks: Verify the Scale at the Working Load
Method reference: Rhopoint: compensated haze. References describe their stated methods or products; they do not certify NANOLAB products or establish compatibility with an unlisted surface.
Ask NANOLAB about the exact product and intended use. Use the current product documentation for formulation-specific instructions.
Continue reading
Standard Deviation vs Standard Error in Coating Test Reports
Distinguish standard deviation from standard error and label coating-test error bars so process variation is not hidden.
Choosing Microfiber Towels for Ceramic Coating
Choose towels by their role in the coating process, cleanliness and finish suitability rather than assuming the thickest towel is always best.
Coating Viscosity Reports: Record the Spindle and Speed
A rotational-viscosity result needs its test conditions. Spindle and speed are part of the method, especially for materials whose response depends on shear.