A full polishing range.
From cutting and one-step correction to final finishing.
Ceramic Coating Gloss Claims: Report the Baseline Finish
A final gloss number has limited meaning without the starting finish and preparation process. Paint correction may account for much of the observed change.
Updated · NANOLAB Knowledge
Practical approach
Measure the relevant stages separately under the same method: initial condition, prepared surface and completed coating system.
Comparing an unpolished vehicle with a polished and coated vehicle cannot isolate the coating's contribution to appearance.
Decision limits
Do not attribute every before-and-after improvement to the last product applied. Describe the complete process and the limits of the comparison.
Related guidance
- Heat Resistance Claims for Nano Ceramic Coatings
- How to Check an Independent Nano Coating Laboratory Report
- Coating Trial Averages: Report the Spread Alongside the Mean
- Coating Appearance Photos: Lock Exposure Before Comparing Panels
Method reference: BYK-Gardner: appearance and orange peel. References describe their stated methods or products; they do not certify NANOLAB products or establish compatibility with an unlisted surface.
Ask NANOLAB about the exact product and intended use. Use the current product documentation for formulation-specific instructions.
Continue reading
Heat Resistance Claims for Nano Ceramic Coatings
Read heat-resistance claims for nano ceramic coatings by checking exposure type, temperature measurement, substrate and the property assessed after heating.
How to Check an Independent Nano Coating Laboratory Report
Check whether a laboratory report actually supports a nano coating claim by reviewing sample identity, method, scope, results and the connection to the sold product.
Coating Trial Averages: Report the Spread Alongside the Mean
Two groups can share the same average while differing greatly in consistency. A measure of spread helps reveal that difference.