Professional Detailing2 min read

Quantification Limit in a Coating Report: Detection and Reliable Measurement Differ

A laboratory may detect a signal without being able to quantify it reliably at the level required for a decision. Keep detection and quantification terminology separate when reading a coating-analysis report.

Updated · NANOLAB Knowledge

The key distinction

Ask the laboratory how it defines and reports the relevant limits for the method. The distinction matters when a buyer wants a precise concentration or a comparison with an acceptance criterion. A trace indication should not be converted into a confident numerical claim without the laboratory's supporting basis.

Practical checks

  1. Identify the reported result type and its associated limit.
  2. Ask whether the method's quantification capability is suitable for the decision.
  3. Preserve qualifiers when transferring results into specifications or comparison tables.

Example

Illustrative example: a report includes a qualified trace observation, but a purchasing spreadsheet removes the qualifier and treats the value as exact. That can create a false precision in supplier ranking. The buyer should retain the original reporting status and request clarification before making the comparison.

Scope and limits

This guide does not prescribe a laboratory detection or quantification procedure. Nor does it establish a safe or acceptable concentration for any substance. The appropriate method and decision rule depend on the specific product, claim and requirements being evaluated by the responsible technical parties.

Related guidance

Ask NANOLAB about the exact product and intended use. Use the current product documentation for formulation-specific instructions.

Professional Detailing2 min read

Reading an Adhesion Test Report for a Nano Coating

Read nano coating adhesion reports by checking the substrate, preparation, test method and failure observation instead of relying on a pass label alone.

Professional Detailing2 min read

Below Detection Limit Does Not Mean a Coating Contains None

An analytical result reported below a detection limit does not establish absolute absence. Preserve the method limit and reporting language when summarizing a coating or ingredient analysis.