A full polishing range.
From cutting and one-step correction to final finishing.
Dynamic and Kinematic Viscosity in Coating Specifications
Dynamic and kinematic viscosity use different quantities and units. Density connects them under the appropriate conditions.
Updated · NANOLAB Knowledge
Practical approach
Check whether the report uses cP or mPa·s, versus cSt or mm²/s, and preserve the stated temperature and method.
A value of ten in one viscosity unit is not automatically the same specification as ten in the other.
Decision limits
Do not convert without a relevant density and confirmation that the conversion is appropriate for the material behaviour.
Related guidance
- Comparing Coating Viscosity at Different Temperatures: Build a Fair Test
- Choosing Microfiber Towels for Ceramic Coating
- Coating Viscosity Reports: Record the Spindle and Speed
- Coating Viscosity Units: Centipoise and Millipascal-Seconds
Method reference: AMETEK Brookfield: viscometer principles. References describe their stated methods or products; they do not certify NANOLAB products or establish compatibility with an unlisted surface.
Ask NANOLAB about the exact product and intended use. Use the current product documentation for formulation-specific instructions.
Continue reading
Comparing Coating Viscosity at Different Temperatures: Build a Fair Test
Compare coating viscosity at consistent sample temperatures and distinguish ordinary flow changes from possible storage damage.
Choosing Microfiber Towels for Ceramic Coating
Choose towels by their role in the coating process, cleanliness and finish suitability rather than assuming the thickest towel is always best.
Coating Viscosity Reports: Record the Spindle and Speed
A rotational-viscosity result needs its test conditions. Spindle and speed are part of the method, especially for materials whose response depends on shear.