IN DEVELOPMENT / MATRIX SERIES
MATRIX ELITE P7020
The next flagship of the MATRIX series.
75%Solids content
NANOLAB®FOUNDATION COATING
CHEMISTRY YOU CAN TRUST.50 ml
FOUNDATION COATING
QUARTZ99. Layerable quartz base coat
A strong foundation for your chosen finish.
A quartz base coating designed for mechanical protection and strong adhesion. Also ideal for headlight restoration. Pair it with a suitable top coat to achieve your preferred water behaviour and finish.
Designed for
Clear coat and restored plastic headlights; designed as a base beneath a compatible top coat
For NANOLAB Certified Installers only.
50 mlApplication guidance below
BASELayerable coating
50 mlBottle size
14 daysFull cure
Developed for the surface.
Designed for the process.
Build from the base.
Designed to form a substantial quartz base layer with strong adhesion.
Choose your finish.
Can be paired with a ceramic coating, sealant or wax as described in the application guidance. This is a non-hydrophobic base coating; water repellency depends on the chosen top coat.
Ideal for headlight restoration.
Its hard quartz layer helps protect the plastic against burning and melting. The hardness of the coating supports more durable, longer-lasting protection after restoration.
02 / KNOW YOUR FORMULAThe details
The details
make the difference.
Choose the right product for your surface. Follow the current application and care guidance.
- Product
- QUARTZ99
- Category
- Layerable quartz base coat
- Size
- 50 ml
- Compatible surfaces
- Clear coat and restored plastic headlights; designed as a base beneath a compatible top coat
Application level10/10
1 = Easiest · 10 = More technique
For an experienced detailer familiar with the QUARTZ99 system, application can be straightforward. The score reflects the technique and timing involved.
Lower scores mean easier application. Higher scores reflect more technique and familiarity with the process. With experience, even a 10/10 product can feel straightforward.
For NANOLAB Certified Installers only. QUARTZ99 is not hydrophobic on its own. Check the application instructions and top-coat requirements before use. Confirm the waiting time for your chosen top coat with NANOLAB before application.
03 / APPLICATION & CAREA considered process.
A considered process.
A lasting impression.
Read the full instructions before you begin.
How To Apply
QUARTZ99 must be applied by a NANOLAB Certified Installer Only!
Pre-Application Preparation: Ensure a pristine surface by thoroughly polishing and removing any traces of oil, grease, fat, fingerprints, etc., using our recommended PREP solution.
Tools Required: In addition to the coating material, prepare an applicator pad and two microfiber towels. Opt for towels of different colors if possible for better organization.
Application Method:
Apply on small areas such as: 1 door, 1/2 hood etc.
Apply in an air-conditioned area with low temperature and low humidity
Do not apply in a direct wind area
- Apply an adequate amount of the coating material onto the applicator pad, ensuring it’s sufficiently primed for even distribution. If the applicator feels “stuck”, apply more material as needed.
- Commence by outlining the area for application, starting from the surface edges. Then, create a central X shape to facilitate uniform coverage.
- Employ crisscross motions to spread the material along the X and Y axes, ensuring thorough coverage.
Buffing Phase: To promote strong adhesion, refrain from wiping the coating immediately post-application. Allow it to haze over or display the rainbow effect before proceeding. Use the first towel to swiftly remove excess material in straight lines; speed is key at this stage, with no need for perfection. Subsequently, utilize the second towel to buff the surface in circular motions, ensuring no high spots remain.
Curing Times:
Tack-Free / Top-Coat: 40 Minutes
Initial Curing: 6 hours
First Wash: As Recommended For The Top-Coat
Full Curing: 14 days
Storage
NANOLAB QUARTZ99. has a shelf life of at least 12 months when stored between 0°C / 32°F and 25°C / 77°F in the tightly closed original container.
After opening – must be used within 180 days.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Maintenance
Quartz99 is a non-hydrophobic permanent quartz coating, simply reapply as instructed.
Maintenance primarily involves the upkeep of its top coat, with detailed maintenance guidelines provided for optimal care.
Material Safety Data Sheet
COMPLETE THE PROCESS
All products ↗Find your next step.
YOUR NEXT GREAT FINISH STARTS HERE
Make it QUARTZ99.
Connect with a distributor for availability and product support.