IN DEVELOPMENT / MATRIX SERIES
MATRIX ELITE P7020
The next flagship of the MATRIX series.
75%Solids content
NANOLAB®WHEEL PROTECTION
CHEMISTRY YOU CAN TRUST.50 ml
WHEEL PROTECTION
WHEELS. Ceramic coating for wheels & calipers
Protection where the conditions get tougher.
A high-solids ceramic coating designed for wheels and calipers, with heat and chemical resistance for demanding road conditions.
Designed for
Wheels and calipers
50 mlApplication guidance below
50 mlBottle size
30 minTack-free time
30 daysFull cure
Developed for the surface.
Designed for the process.
Made for the heat.
Developed for the operating conditions around wheels and calipers.
Support cleaner wheels.
Protect against brake dust, road contamination and UV exposure.
Chemical resistance.
Formulated to retain performance around common wheel-cleaning chemicals.
02 / KNOW YOUR FORMULAThe details
The details
make the difference.
Choose the right product for your surface. Follow the current application and care guidance.
- Product
- WHEELS
- Category
- Ceramic coating for wheels & calipers
- Size
- 50 ml
- Compatible surfaces
- Wheels and calipers
Application level2/10
1 = Easiest · 10 = More technique
Easy to apply with basic preparation and the correct product instructions.
Lower scores mean easier application. Higher scores reflect more technique and familiarity with the process. With experience, even a 10/10 product can feel straightforward.
03 / APPLICATION & CAREA considered process.
A considered process.
A lasting impression.
Read the full instructions before you begin.
How To Apply
Pre-Application Preparation: Ensure a clean surface by thoroughly removing any traces of oil, grease, fat, fingerprints, etc., using our recommended PREP solution / APC / Wheel Cleaner.
Tools Required: In addition to the coating material, prepare an applicator pad and a microfiber towel.
Application Method:
Apply an adequate amount of the coating material onto the applicator pad, ensuring it’s sufficiently primed for even distribution. If the applicator feels “stuck”, apply more material as needed.
Achieving optimal results when applying a wheel coating lies in the methodical approach. Employing a systematic technique, such as applying in a clockwise circular motion, ensures comprehensive coverage for maximum effectiveness.
For optimal results, consider applying an additional layer while the previous one is still “liquid” to guarantee complete coverage.
Buffing Phase: To promote strong adhesion, refrain from wiping the coating immediately post-application. Allow it to haze over or display the rainbow effect before proceeding. Use the microfiber towel to swiftly remove excess material in straight lines; speed is key at this stage, with no need for perfection. Subsequently, flip the microfiber towel to buff the surface, ensuring no high spots remain.
Curing Times:
Tack-Free: 30 minutes
Initial Curing: 12/24 hours (weather-dependent)
First Wash: 14 days
Full Curing: 30 days
Storage
NANOLAB WHEELS. has a shelf life of at least 12 months when stored between 0°C / 32°F and 25°C / 77°F in the tightly closed original container.
After opening – must be used within 180 days.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Maintenance
In order to Maintain your NANOLAB WHEELS. Coating, Please follow these simple yet important steps:
- Clean well and remove all of the dirt and wash well.
- Spray NANOLAB IRON. on the wheel & caliper, wait untill it becomes purple and react with the IRON OXIDE particles
- When preparing for maintenance, ensure thorough surface cleaning using PREP / APC to eliminate any potential barriers that might lead to application failures.
- Apply an additional layer and get ready to enjoy a seamless experience.
Material Safety Data Sheet
COMPLETE THE PROCESS
All products ↗Find your next step.
YOUR NEXT GREAT FINISH STARTS HERE
Make it WHEELS.
Connect with a distributor for availability and product support.